Anker SOLIX F2600 Portable Power Station (User Manual)

Product Overview

The Anker SOLIX F2600 is a high-capacity portable power station designed for off-grid power needs, emergency backup, and outdoor adventures. It features multiple charging options, smart app control, and compatibility with expansion batteries.

Table of Contents

What is in the Box 


  • Anker SOLIX F2600 Portable Power Station
  • AC Charging Cable
  • Car Charging Cable
  • Solar Charging Cable
  • Accessories Bag
  • User Manual

Overview

  1. Display Button
  2. Iot Button
  3. Power Saving Button
  4. Car Socket Button
  5. USB Ports
  6. Car Sockets
  7. TT-30R AC Output Port
  8. NEMA-20R AC Output Ports
  9. AC Outlet Button
  10. Retractable Handle (Press the button on the retractable handle and pull to extend)
  11. Solar Input and Car Input
  12. Overcharge Protection
  13. AC Input Port
  14. Wheel(s)
  15. Expansion Battery Port 

Recharging the Power Station

AC recharging (1440W Max)

Recharge your power station by connecting to a wall outlet with the AC charging cable.

Car Recharging

Recharge your power station by connecting to a car's output port with the car charging cable.

 

Powering Devices 

Power Saving Mode

Turning on the Power Saving mode prevents wasting energy as it automatically turns off the power station once all your devices are fully charged.

Turning off the Power Saving mode will enable stable charging over an extended period, such as for time-lapse photography or when using a CPAP machine overnight.

The AC outlets can intelligently identify whether a plug is inserted. This helps prevent power wastage by automatically turning off the power station if no plug is detected for more than 15 minutes, whether the Power Saving mode is turned on or off. AC Charging

AC Charging

Press the AC outlet button and connect your devices to the AC output ports.

 

USB Charging

Connect device to the USB Ports.

 

Car Socket Charging

Turn on the car socket and connect your devices to start charging. 

 

Uninterruptible Power Supply (UPS)

To use the UPS feature, connect your power station to a wall outlet with the AC charging cable. Then, press the AC outlet button and connect your devices via the AC output ports. With the UPS connection, your devices will be powered via bypass charging.

Light

Ambient light

Press  the button once to turn on the ambient light, and press again up to 2 times to switch between brightness levels.

SOS Mode

Press and hold the button for 2 seconds to turn on SOS mode.

LCD Screen Guide 

  1. Current Output Power
  2. Current Input Power
  3. IoT
    • Press the IoT button once to turn on Bluetooth and Wi-Fi, and connect your devices through the app when this icon appears on the screen.
    • Press the IoT button for 2 seconds to turn off Bluetooth and Wi-Fi.
    • Press the IoT button for 7 seconds to reset Bluetooth and Wi-Fi.
  4. Remaining Battery for Expansion Battery
    • When the expansion battery is connected successfully, this icon appears on the screen.
  5. USB-A Output Port
  6. USB-C Output Port
  7. Car Charging
  8. AC Charge and Voltage Frequency
  9. Low-Temperature Alert
    • When this icon shows, stop using the power station until the icon disappears.
  10. High-Temperature Alert
    • When this icon shows, stop using the power station and let it cool down until the icon disappears.
  11. Overload Warning
    • This icon appears when a port is overloaded. The port will be turned off to avoid any damage.
    • Please remove the device causing overload.
  12. Estimated Time to Fully Recharge
  13. Estimated Time for Battery to Deplete
  14. Remaining Battery for Power Station
  15. Power Saving Mode

FAQs

Q1: What is the max power output of the AC output ports?

  • The AC output ports can deliver a maximum of 2400W to connected devices.

Q2: Can Anker SOLIX F2600 Portable Power Station power a CPAP machine?

  • Yes, but make sure to turn off the Power Saving mode first.

Q3: What should I do when using a solar charger to charge Anker SOLIX F2600 Portable Power Station?

  • The solar input supports an 11-60V solar charger with an XT-60 connector. If you use an 11-32V solar charger, the current supports 10A max. When you use a 32-60V solar charger, the current supports 20A max. We recommend using Anker solar panels to get the best compatibility.

Q4: Can the USB-C ports be used to charge Anker SOLIX F2600 Portable Power Station (input only) or are they output only?

  • The USB-C ports support output only.

Q5: What should I do when AC recharging fails?

  • If AC recharging does not work, check to see if the overload protection switch is switched on. If it is on, press down to reset and then continue recharging.

Q6: How do I reset Anker SOLIX F2600 Portable Power Station?

  • If your power station isn't working correctly, insert a paper clip or pin into the reset hole for 1 second for a factory reset. If the power station still doesn't work, please contact support@anker.com.

Q7: Why is the power station not working after it hasn't been used for a long time?

  • If the power station is stored at a low capacity for a long time, lithium batteries will self-consume power which may lead to a quick discharge. This often leads to poor conductivity and a reduced battery lifespan that causes the battery not to work.

Q8: How should I store and maintain the power station?

  • When storing your portable power station, please make sure that you:
    1. Turn off all the outputs.
    2. Store the power station in a dry and cool environment. 
    3. Check the remaining battery capacity each week. If the battery level is below 30%, fully charge the power station. Don't forget to charge it to 100% once every 3 months.

Important Safety Instructions

WARNING - When using this product, basic precautions should always be followed, including the following:

  • Read all the instructions before using the product.
  • To reduce the risk of injury, close supervision is necessary when the product is used near children.
  • Do not put fingers or hands into the product.
  • Do not expose the product to rain or snow.
  • Use of an attachment not recommended or sold by the product manufacturer may result in a risk of fire, electric shock, or injury.
  • To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the product.
  • Do not use the product in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury.
  • Do not use the product or attachment that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
  • Do not operate the product with a damaged cord, plug, or output cable.
  • Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.
  • Do not expose the product to fire or high temperatures. Exposure to fire or temperatures above 130°C may cause explosions.
  • To reduce the risk of electric shock, unplug the power pack from the outlet before attempting any instructed servicing.
  • Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
  • When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
  • When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.
  • Do not clean the product with harmful chemicals or detergents.Misuse, dropping, or excessive force may cause product damage.
  • When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
  • Do not use or store the power station in direct sunlight for a long period, such as in a car, cargo bed, or any other place where it will be exposed to high temperatures. Doing so may cause the product to malfunction, deteriorate, or generate heat.

CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

  • Disposal of a battery into a fire or hot oven, or mechanically crushing or cutting off a battery, can result in an explosion.
  • Leaving a battery in an extremely high-temperature environment can result in an explosion or leakage of flammable liquid or gas.
  • A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas.
  • Unplug the AC power cable to disconnect from the line voltage.

WARNING: Grounding Instructions

This product must be grounded. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electric shock. This product is equipped with a cord with an equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING – Improper connection of the equipment grounding conductor may result in an electric shock. Check with a qualified electrician if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.

Storage and Maintenance Instructions

1. Store the product between 32°F-104°F (0°C-40°C). Avoid exposing the product to rain or using the product in a humid environment.
2. To preserve the battery lifespan, charge to 100% after using. If you plan to store your power station, recharge to 100% every 3 months.
3. Keep the product on a flat surface when using, charging, and storing.

Specifications

  Cell Capacity

  2560 Wh 

  AC Input Voltage

  120V~ 12A Max, 60Hz

  AC Input Power (Charging)

  1440W Max

AC Input Power (Bypass Mode)

  1440W Max

Solar Panel Input

  11-32V  10A; 32V-60V         20A (1000W Max)

Car Charger Output

  12V  10A

AC Output

  120V~ 20A, 60Hz, 2400W Max

USB-A Output

  5V  2.4A (2.4A Max Per Port)

USB-C Output (100W)

  5V  3A/9V  3A/15V  3A/20V     3A/20V

UPS

  20ms

Discharging Temperature

  -4°F-104°F / -20°C-40°C

Charging Temperature

  32°F-104°F / 0°C-40°C

Size

  20.7 × 15.5 × 9.8 in / 52.5 × 39.5 × 25.0 cm

Net Weight

 69.7 lb / 31.6 kg

Print Article