Your iPhone or
iPod Touch must have version 2.0 or higher. To determine
your version, touch Settings, touch General,
touch About and confirm your version. Continue
with the AirVandalGold setup instructions below if your device
has version 2.0 or higher.
1.
Select Settings
from the home screen. (See
Figure 1)
Figure 1. Home Screen
2. Select
Wi-Fi from the menu.
(See Figure 2)
Figure 2. Settings Menu
3. Under “Choose a Network”, touch
AirVandalGold. (See Figure 3)
Figure 3 Choose AirVandalGold
4. Enter your University username and corresponding
password when prompted. (See
Figure 4)
Figure 4. Enter University Credentials
5. Touch
Accept to use the
certificate. (See Figure 5)
Figure 5. Accept Certificate
6.
AirVandalGold should have a check mark next to it.
7. Touch
Settings in the upper
left-hand corner. (See
Figure 6)
Figure 6. Verify Settings
8. Confirm
AirVandalGold is
connected. (See Figure 7)
Figure 7. Verify AirVandalGold is connected
|
